Vivo Y30 PD1987F Flash File (Stock Rom)

 

Vivo Y30 PD1987F Flash File Firmware Official Rom used for fix brick condition, Bootloop, hang on logo and corrupted device and flashing of stock rom remove root sign from device. Stock rom flashing can repair imei and fix all red, orange and yellow state problems.

Download Vivo Y30 PD1987F Flash File Firmware:

• PD1987F_EX_A_1.70.25_vivo_mtk — Google Drive Link
• PD1987F_EX_A_1.70.23_vivo_mtk — Google Drive Link
• PD1987F_EX_A_1.70.21_vivo_mtk — Google Drive Link
• PD1987F_EX_A_1.70.19_vivo_mtk — Google Drive Link
• SP Flash Tool
• Vivo Y30 Driver

Pre-requisites before flashing Vivo Y30 PD1987F

Battery should be charged up to 70%
Make sure you have Vivo USB OG Cable
Download SP Flash Tool
Download And install drivers in your pc

Here is some advantage of flashing stock rom to Vivo Y30 remove root sign, fix hanging problem, back your device to factory state and warranty state and In some situations we make our device bricked by rooting or testing something else or by doing such experiments with our mobile due to all of these things sometimes our device got hard bricked. If your Vivo Y30 is hard bricked and showing only MediaTek USB PORT Port then you have to flash the device in Upgrade Mode and use auth tool. Stock Rom fix all Brick and hard bricked condition of your device.

How To Flash Vivo Y30 PD1987F Using SP Flash Tool:

1. Download and install MediaTek driver in your pc (skip this step if MediaTek drivers are already installed)
2. Download flash File and tool and extract both
3. Run flash tool and select Scatter File from flash file folder
4. Click Download Button
5. Connect your mobile by pressing volume up and down buttons
6. All Done.

Note: If your device is not connecting to pc then download the driver from above and install in your pc.

If you getting any error in flashing then Contact Me. I will help you.